收藏本站
BH1603FVC
Technical Note
● Notes for use
1) Absolute Maximum Ratings
An excess in the absolute maximum ratings, such as supply voltage ( Vmax ), temperature range of operating conditions
(Topr), etc., can break down devices, thus making impossible to identify breaking mode such as a short circuit or an open
circuit. If any special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take
physical safety measures including the use of fuses, etc.
2) GND voltage
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
Furthermore, check to be sure no terminals are at a potential lower than the GND voltage including an actual electric
transient.
3) Short circuit between terminals and erroneous mounting
In order to mount ICs on a set PCB, pay thorough attention to the direction and offset of the ICs. Erroneous mounting can
break down the ICs. Furthermore, if a short circuit occurs due to foreign matters entering between terminals or between
the terminal and the power supply or the GND terminal, the ICs can break down.
4) Operation in strong electromagnetic field
Be noted that using ICs in the strong electromagnetic field can malfunction them.
5) Inspection with set PCB
On the inspection with the set PCB, if a capacitor is connected to a low-impedance IC terminal, the IC can suffer stress.
Therefore, be sure to discharge from the set PCB by each process. Furthermore, in order to mount or dismount the set
PCB to/from the jig for the inspection process, be sure to turn OFF the power supply and then mount the set PCB to the jig.
After the completion of the inspection, be sure to turn OFF the power supply and then dismount it from the jig. In addition,
for protection against static electricity, establish a ground for the assembly process and pay thorough attention to the
transportation and the storage of the set PCB.
6) Input terminals
In terms of the construction of IC, parasitic elements are inevitably formed in relation to potential. The operation of the
parasitic element can cause interference with circuit operation, thus resulting in a malfunction and then breakdown of the
input terminal. Therefore, pay thorough attention not to handle the input terminals; such as to apply to the input terminals a
voltage lower than the GND respectively, so that any parasitic element will operate. Furthermore, do not apply a voltage to
the input terminals when no power supply voltage is applied to the IC. In addition, even if the power supply voltage is
applied, apply to the input terminals a voltage lower than the power supply voltage or within the guaranteed value of
electrical characteristics.
7) Thermal design
Perform thermal design in which there are adequate margins by taking into account the permissible dissipation (pd) in
actual states of use.
8) Treatment of package
Dusts or scratch on the photo detector may affect the optical characteristics. Please handle it with care.
9) Rush current
When power is first supplied to this IC, rush current may flow instantaneously. Because it is possible that the charge
current to the parasitic capacitance of internal photo diode or the internal logic may be unstable.
Therefore, give special consideration to power coupling capacitance, power wiring, width of GND wiring, and routing of
connections.
10) The exposed central pad on the back side of the package
There is an exposed central pad on the back side of the package. But please do it non connection.
( Don't solder, and don't do electrical connection )
Please mount by Footprint dimensions described in the Jisso Information for WSOF6.
This pad is GND level, therefore there is a possibility that LSI malfunctions and heavy-current is generated.
www.rohm.com
? 2012 ROHM Co., Ltd. All rights reserved.
7/8
2012.02 - Rev.D
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL.BH1620FVC BOARD EVAL FOR BH1620FVC
EVAL.BH1721FVC BOARD EVAL FOR BH1721FVC
EVAL-KXD94-2802 BOARD EVALUATION FOR KXD94-2082
EVAL-KXR94-2283 BOARD EVALUATION FOR KXR94-2283
EVAL-KXR94-2353 BOARD EVALUATION FOR KXR94-2353
EVAL-KXRB5-2050 BOARD EVALUATION FOR KXRB5-2050
EVAL-KXSS5-4457 BOARD EVALUATION FOR KXSS5-4457
EVAL-KXTC9-2050 BOARD EVALUATION FOR KXTC9-2050
相关代理商/技术参数
EVAL.BH1620FVC 功能描述:BOARD EVAL FOR BH1620FVC RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:-
EVAL.BH1721FVC 功能描述:BOARD EVAL FOR BH1721FVC RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:-
EVAL_AD7682CBZ 制造商:Analog Devices 功能描述:
EVAL_PAN1026 制造商:Panasonic Industrial Devices 功能描述:PAN1026 EVALUATION KIT (TWO PAN1026ETU DEVELOPMENT MODULES) - Boxed Product (Development Kits) 制造商:Panasonic Industrial Company 功能描述:Evaluation Kit for the PAN1026 Class 2 Bluetooth Low Energy SPP Module 制造商:Panasonic Industrial Devices 功能描述:EVAL BOARD, PAN1026 BLUETOOTH, Silicon Manufacturer:Panasonic, Silicon Core Number:PAN1026, Kit Application Type:Wireless Connectivity, Application Sub Type:Bluetooth, Kit Contents:Eval Board PAN1026, Features:(Not Applicable)
EVAL_PAN1311 制造商:Panasonic Industrial Devices 功能描述:Bluetooth / 802.15.1 Development Tools EVAL KIT 3.25Mbps
EVAL_PAN1315 制造商:Panasonic Industrial Devices 功能描述:Evaluation Board For Bluetooth HCI Module
EVAL_PAN1315ETU 功能描述:蓝牙/802.15.1 开发工具 PAN1315 on Adpater - brd proto SPP W/ANT RoHS:否 制造商:Panasonic Electronic Components 产品:Bluetooth Evaluation Kit 工具用于评估:PAN1721 频率:2.4 GHz 接口类型:I2C 工作电源电压:2 V to 3.6 V
EVAL_PAN1321 制造商:Panasonic Industrial Devices 功能描述:EVAL KIT FOR PAN1321 INFINEON